How To Make A Tonneau Cover For Your Truck

Although a good Tonneau cover is an investment, you might feel like the cost incurred in buying one is not very practical. However, the good news is that you don’t have to buy a new one to enjoy the benefits of having a Tonneau cover. 

In this article, you will learn how to make a Tonneau cover for your truck. Fewer costs but with good quality that would require some sturdy materials and a little of your effort and energy. So let’s start!

Why You Need A Tonneau Cover

Before we get into the steps, let us first understand the benefits a good Tonneau cover can bring to your car. Otherwise, you won’t be spending your energy on anything.

These are a few things that you can benefit from a Tonneau cover:

Moving Huge And Heavy Cargo

Tonneau coverings can be helpful when transporting heavy and tall objects.  A slide, folding, or retractable tonneau cover can be partially opened to accommodate tall cargo. However, a stretchable, flexible tonneau cover is required if you want the tonneau to cover your equipment.

Transporting Tools

If your vehicle has a tonneau, you can drive confidently, whether parked in the garage, on the street, or at a job site. You'll have peace of mind knowing that your goods are safe and weatherproof. In addition to offering you the protection of having those items secured, a tonneau gives you the option of storing items in the truck bed.

How To Do The DIY Tonneau Covers

These are the easy-to-follow steps you must take to benefit from the advantages of having a good tonneau cover without buying a new one.

The majority of DIY covers are the rigid type. The simplest option is a rigid-style tonneau cover because folding tonneau covers demand a little more accuracy and soft covers likely require some sewing skills. 

Prepare the following:

• 1X2" plywood in six pieces  nut measurements may change
• (2) two plywood sheets 
• The fabric vinyl
• A Drill
• Desk Saw
• Fasteners or Srews
• Stapler
• Hinges
• Spray adhesive
• Contact cement
• A dark color paint

Step 1. Determine The Frames

Using the 12 plywood, construct two frames as the initial phase. The openable tonneau cover will be supported by one frame, while the other will be fastened to the truck bed. Either frame should fit inside the truck's bed with around 1 cm between the platform and the frame on each side for measuring purposes. 

The frames are crucial since they provide the cover with structural stability and will be used to fasten it to the truck's bed.

Step 2. Cut The Plywood And Install The Hinge

Cut up plywood pieces to size for the frames.  The plywood must be wider than the frames' vertical and lateral lengths by an amount equal to that of your truck bed's side rails. 

To put it another way, if you put the wood straight on top of the truck's bed, it should cover the entire surface of the bed. And you'll need to attach the hinge to ensure there is no overlapping between both frames.

Step 3. Painting The Cover

Although this process is optional, it can help prevent the plywood from moisture absorption, boost toughness, and prolong the wood's lifespan. Place the hinges where you would like the tonneau covering to unfold after the paint has dry.

Conclusion

You can have Tonneau covers without buying expensive ones. If you are not into handicrafts, you can ask for help or purchase a new one. For a high-quality Tonneau cover, visit Truck2Go, the number one Tonneau cover and car accessories supplier.